Close

PCB design V1 finished & fabricated

A project log for Workbench 12V Lighting Controller

Arduino-based PWM controller for 6 channels of 12V lighting (2 RGB), with master and individual dimming, memory.

corticescortices 04/25/2019 at 02:250 Comments

I finished the V1 PCB design over the Easter long weekend and ordered the PCB from JLCPCB.com.

I also ordered the components from Mouser and AliExpress.

A few days later, the PCBs were in my hands! Very impressed by the low cost and super-fast turnaround of JLCPCB.

The only immediately visible issue is that I didn't pay attention to the silkscreen Gerber export and it's missing the values layers and some outlines & text. But otherwise everything seems correct! I'm very happy with them.

I'll put up the V1 schematic and board Eagle files shortly.

Discussions