Close

upgrade to Real Time Linux

A project log for 3Dprinter firmware run on raspberryPi

PandaPi is a 3D printer firmware based on Marlin runs on raspberry Pi instead of runs on arduino MCU or other 32bit MCU.

markmark 08/15/2019 at 03:340 Comments

As we can see, the maximum latency from about 1018us to about 59us!

before upgrade:

upgrade to RTlinux:


also, you can see the stepps https://www.get-edi.io/Real-Time-Linux-on-the-Raspberry-Pi/


Discussions