A project log for 'Thor' robot with addons and GUI

Thor robot based on the author AngelLM

dannyvandenheuveldannyvandenheuvel 09/23/2017 at 20:277 Comments

Upgrade Thor+ V2.04 ... Feedback stability improvements, Added extra fans and changed some design. (By Sepio & Danny)

All STL and STEP files online!


Eng. Nadhmi M. Al-Mulaiki wrote 05/13/2019 at 23:44 point

Hi sir 

I have been looking to this update list in Thor Arm project 

i like this update list i also interested in Ultatronics Pro v1.0 

i want the sketch for this board 

  Are you sure? yes | no

Bassamalghram wrote 05/12/2019 at 11:44 point

how can I find the cad model of this version (V 2.04) so I can print them by 3D printer.please, help me

  Are you sure? yes | no

Bassamalghram wrote 05/12/2019 at 14:03 point


  Are you sure? yes | no

Zboy1997 wrote 02/17/2019 at 13:30 point


This project is really wonderful, and I am deeply attracted by it. I am a college student, I want to design a 3D printing mechanical arm like this by myself, but I don't know how to start, so I would like to ask you what analytical design software is used in the design of this mechanical arm.What knowledge base does the design require?Is there any reference to the learning books recommended?I would appreciate it if you could give me some hints.


  Are you sure? yes | no

Sepio wrote 11/05/2017 at 13:51 point

Nice. I also changed a lot the last few weeks. (Look at my day 18 log for more info). What are the design changes your talked about. The Art2 covers are changed. Is there anything else? I would like to keep our versions the same. By the way I like the new colour scheme ;-)

  Are you sure? yes | no

Olaf Baeyens wrote 09/24/2017 at 00:36 point

I just printed your THOR+ V2.03 with vertical holes. ;-)  Those ventilation openings where the ventilator goes may be a bit thing but I am going to assemble it in the next week and see if it cools the steppermotor enough.  I can always cut them to increase the air flow.

  Are you sure? yes | no