Close
0%
0%

Wireless Animatronic Pokemon Plushie

Completely wireless event notifications via sounds and movement

robbRobb
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Public Chat
Similar projects worth following
372 views
2 comments
3 followers
View Gallery
Public Chat
Place the ZigZagoon down with its foot on the right spot and it'll come to life.

My idea is to embed a Qi charging receiver in the foot of a plushie. I'm trying a ZigZagoon for starters. Qi charging stations are everywhere now: I even have a desk with one built-in (see the picture). 

The Qi receiver will power a low-energy bluetooth arduino, speaker, and a servo or two. Paired with a nearby computer or phone, and configured with IFTT, the ZigZagoon will growl or move to alert me to different things.

Current Status: I just got an AdaFruit "Universal Qi Wireless Receiver Module", and am going to test its output and see how well it fits into the plushie.

  • 1 × Universal Qi Wireless Receiver Module From the Adafruit website: "If you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.' Qi is a trademark name for a thin and smart inductive charging system. Many large gadget companies have standardized on Qi, which means it's easy to find a charging dish and we thought it might be cool if your Arduino project can recharge itself wirelessly. Thus, we now have a Qi charging receiver module as seen here here. This is just the inductive charging Qi receiver. It will work with any Qi charger base transmitter..."

  • Slugma: Backup Pokemon

    Robb • 08/27/2019 at 21:16 • 0 comments

    My first choice, the Zigzagoon, has a problem: the actual plushie's foot is maybe a bit too small for the Qi charging coil. So I searched for other Pokemon plushies that:

    1. have a wide base, and
    2. have appendages that can be moved a bit with servo motors.

    Turns out, these are pretty hard to find, especially in a plushie. But I found that the Slugma (Pokedex) meets both criteria. It has a nice big foot and a head and some dripping fire that can be wiggled. So I ordered a plushie, which arrived today. It's much smaller than the Zigzagoon, but it's a very simple shape to work with:

  • Qi Receiver received

    Robb • 08/22/2019 at 18:23 • 0 comments

    This is a really interesting piece of hardware: a coil that picks up the power, and a circuit which evens it out to 5V and 500mA, I believe.

    But whoops, I don't veen have a soldering iron yet, so I'm going to have to wait a few days to even see if and how it works!

View all 2 project logs

Enjoy this project?

Share

Discussions

Robb wrote 08/21/2019 at 21:56 • point

:-) That can be a little tricky. Amazon does carry official Pokemon plushies. 

The biggest challenge is finding one that (1) has room in its foot for the Qi receiver, and (2) has some appendages that can be moved around a bit. So Slugma's my backup - that big wide circular pod has plenty of room.

  Are you sure? yes | no

davedarko wrote 08/21/2019 at 21:24 • point

but where does one buy the plushies?

  Are you sure? yes | no

Similar Projects

Repairing a microprocessor controlled NiCd/NiMH charger
Project Owner Contributor

Ansmann POWERline 4 repair

badgerbadgermushroomBadgerBadgerMushroom

An automated precision photography turntable for large and heavy objects. Codename : Verto II
Project Owner Contributor

Yet another turntable for photography

timescaleTimescale

Is it really off-grid if it has the Internet?
Project Owner Contributor

Off-Grid Solar Internet

dan-maloneyDan Maloney

Ring that has interesting vocabulary, plays accelerometer Pong, and answers questions. Implemented on the Arduino-based MicroView platform.
Project Owner Contributor

Wordy

elecia-whiteElecia White

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Wireless Animatronic Pokemon Plushie", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.