Quantity   Component name
2 × Particle Xenons
1 × Adafruit Music Maker FeatherWing - MP3 OGG WAV MIDI Synth Player
1 × Female Headers I used these on all of the components as I figured I’d likely scavenge from this project in the near future, since it’s mainly for Halloween
1 × Zip-ties (or screws/nails) For the Motion Sensor
1 × 4-wire Phone Wire For wiring up the LEDs
1 × Heat-shrink tubing
1 × Numerous M3x7 screws For Assembling Everything
1 × 3D-Printed Components Modified Hypnotoad model with wire routing, Motion Sensor and Controller Enclosures, & Motion Sensor and Controller Enclosure Lids
2 × NeoPixel Diffused 5mm Through-Hole LEDs
1 × Ultrasonic Distance Sensor - 3V or 5V - HC-SR04 compatible - RCWL-1601
1 × 3xAA Battery Pack For Motion Sensor
1 × Toggle Switch For Motion Sensor
1 × 300-500 Ohm Resistor For Neopixels
1 × 1,000 uF Capacitor For Neopixels (I used a 3k capacitor because that’s all I had handy)
3 × Screw Terminals For Neopixels