mpptproto-1_1-b20.zipSource code: replaces low output voltage check with over-current & addition of 'sweep' P&O algorithm.Zip Archive - 45.21 kB - 02/16/2020 at 13:13 |
|
|
binary.hShared include file required to build the firmware.x-chdr - 883.00 bytes - 11/01/2019 at 01:19 |
|
|
mpptproto-l1-r1.pdfDesign spec sheet for buck inductor.Adobe Portable Document Format - 67.85 kB - 10/31/2019 at 18:03 |
|
|
mpptproto-config-191030.pdfPDF of PIC peripheral configuration for gate drive, control loops and synchronous low-side.Adobe Portable Document Format - 21.70 kB - 10/31/2019 at 18:02 |
|
|
mpptproto-config-190613.schAutodesk Eagle schematic as-built. Only install components from BOM that are also listed here. Additional components have part# attribute with Digikey part number.sch - 31.93 kB - 10/31/2019 at 18:00 |
|
|
mpptproto-190613-s2.pdfPDF of schematic, page 2 of 2.Adobe Portable Document Format - 20.65 kB - 10/31/2019 at 18:00 |
|
|
mpptproto-190613-s1.pdfPDF of schematic, page 1 of 2.Adobe Portable Document Format - 25.91 kB - 10/31/2019 at 18:00 |
|
|
mpptproto-190613-b.pdfPDF of board with annotations for modifications to stock 125vbuck PCB.Adobe Portable Document Format - 82.99 kB - 10/31/2019 at 17:58 |
|
|
mpptproto.xlsxExcel design workbook including BOM.sheet - 83.87 kB - 10/31/2019 at 17:58 |
|
|
mpptproto_1-0.X.zipMPLAB project folder containing all firmware source. Should compile in 'free' mode.Zip Archive - 658.88 kB - 10/31/2019 at 17:57 |
|