Close
0%
0%

3D Printed Prototype "Transmission".

In order to add mechanical motion reversal to some of my 3D printed models, I'm working on this prototype "transmission".

Similar projects worth following
This model is of a prototype "transmission" I'm working on to add motion reversal and a power take off to an upcoming design. The shaft extending from the right face in the photo is the "shift" lever, allowing the reversal of the main shaft (the closest gear shaft in the photo) and activation of the power take off (the furthest gear shaft in the photo). The gear train is idle between operating modes.

A video of the prototype transmission is here: https://youtu.be/3St48Z5emT0.
A video of the prototype shifting mechanism is here: https://youtu.be/Ixf1nCeKHkI.
And a video of the combined mechanisms is here: https://youtu.be/KycMIk3yxyE.

Enjoy this project?

Share

Discussions

Greg Zumwalt wrote 12/10/2019 at 14:55 point

Hi Dan!

I'm still working on it, but it should provide interesting animation effects!

Greg

  Are you sure? yes | no

Dan Maloney wrote 12/09/2019 at 23:30 point

That should come in handy, looking forward to the builds this will enable.

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates