Close
0%
0%

Open Source Cinema Robot

Open Source Cinema Robot (OSCR)
for everyone

Public Chat
Similar projects worth following
This is Open Source Cinema Robot Projectfor everyone.
2020.01.24 // Create Project page
2020.3.22 // Main image update
2020.4.28 // Update ACservo control library repo

AC Servo motor control library repo : https://github.com/njg7194/ServoControl

for now, support arduino.( not yet released. )

Used motor :  https://ko.aliexpress.com/store/group/A4-series-AC-servo-motor-kit/1907567_513054652.html?spm=a2g0o.store_home.pcShopHead_8331878.1_0

50x40 CFRP Pipe Stress test [ Fusion 360 simulation ]

Vertical load 100000N ( ≒ 10000kg )

  • notice!

    No jae gun11/01/2020 at 01:29 0 comments

    There may be some delays due to school graduation and military issues!

    (Korean men must serve in the military.)

  • I HAVE NO IDEA

    No jae gun07/29/2020 at 01:06 0 comments

    Design idea please...

  • Joint2side Link1 component fix

    No jae gun07/17/2020 at 05:14 0 comments

    The design of the model has been changed due to the problem of the production method. Second feedbeck in progress.

  • youtube?

    No jae gun07/08/2020 at 15:57 0 comments

    do i have to start youtube?

  • AC servos arrive!

    No jae gun07/07/2020 at 04:31 0 comments

    AC servo arrived!! it's sooooooo big! almost my arm!

    let's time to test!

  • Teaser

    No jae gun07/05/2020 at 08:17 0 comments

    Rendered into plastic by mis-selecting the material..

    but....

    it's more SEXY

  • RV-50C buying

    No jae gun06/20/2020 at 18:54 0 comments

    Why hasn't it been uploaded? I pressed the upload button..

    anyway

    I bought an RV gear that would fit the bottom of the robot at a local bearing store.

    at around 890$ (50%~ off) (because i m student)

    Normaly the color of the outer case is not black, but this is. because it's not a standard product. 

    As you can see from the drawing, the shape of the Center gear is different.

    Of course, i will planning to produce and upload hardware for the basic model later.

    So.. i have to do make another center gear fitted in this gear.

    this gears reduction ratio is 1:49.82(normaly. you can manage this ratio using custom gearbox)

  • June update.

    No jae gun06/11/2020 at 00:34 0 comments

    Hello guys! long time no see!

    First of all, the project is going on. Don't worry.

    I've been thinking a lot about how to make robotic joints for a month.

    My conclusion is as follows.

    : a reliable structure at a moderate price.

    In fact, the robot arm has a long history of being built. You can search it as an industrial robot on YouTube, and you can see it very simply from 10 years ago.

    For example, KUKA or ABB..

    So the various parts of the robot have already been refined, and we just have to buy and use them.

    While the way to buy and assemble the product may blur the density of the effort in the project, I thought it would be more appropriate to buy the reliable parts than to make all the parts themselves (2.5-5axis CNC machining) because this project would allow many people to create their own "trustworthy" Open Source Cinema robots.

    But because we have to make a firm compromise on the important part of economics, we have decided to move towards the minimum use of these 'well-made' parts.

    Although the price of materials is going up more compared to the price of parts originally planned, I am not going to compromise with the price barrier regarding the quality of finished products.

    So I decided to use the following parts.

    The RV Series reducer.

    For Joint 1. (BASE)

    RV50C (more than 1,000$)

    Because it is a gear that penetrates the main axis of the robot, it is where all the loads are concentrated, and for the robot's smooth rotation, it is decided to use a gear with a crooked hole in the easy-to-pass front, such as a motor cable.

    RV-C Series Gearbox | Hollow Shaft Speed Reducer

    For Joint2.

    RV40E (https://www.aliexpress.com/item/32971948911.html?spm=2114.12010612.8148356.1.7be514abTqoICb)

    For Joint3.

    RV20E(https://www.aliexpress.com/item/32971665771.html?spm=2114.12010612.8148356.5.7be514abJVITQo)

    The gearbox of the RV series will only be used for these three joints. Of the total six joints, the remaining three will be either purchased from other parts or manufactured directly through CNC processing.

    We have not yet secured a place to purchase parts for the BASE axis, but we will update the information before the project is finished. In my case, I will purchase through a local supplier.

    Except for the three axes above, the other three axes will adopt a power transfer method through metal wire control for lightening.(see below video)

    This is to inform you that there may be some upward revision for the model number.

    Time to go to work!

  • little notice

    No jae gun05/18/2020 at 13:03 0 comments

    That's right. It's been a long time since I had my last log.

    truly, i have some problem now. ( not about the entire project )

    The motor I ordered for the test was broken by my mistake.

    So far, I've talked to the manufacturer for motor A/S and will send the motor back to the manufacturer tomorrow

    The project is going on, so don't worry!

  • It's showing!

    No jae gun05/03/2020 at 15:31 0 comments

    modbus test success!

View all 26 project logs

Enjoy this project?

Share

Discussions

Dan Maloney wrote 01/24/2020 at 17:02 point

"Cinema robot" as in robot to help make films, or robot to be in films?

  Are you sure? yes | no

No jae gun wrote 01/25/2020 at 02:48 point

that mean is robot to help make films. like this

https://youtu.be/UIwdCN4dV6w

https://www.youtube.com/watch?v=HRvnYmxcMOY

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates