Build Instructions

Collapse

• 1

  Create a template

  Create a 2" diameter circle an mark 6 spots for the LED's (approximately  45 degree from each other)
  

• 2

  Bend the brass rod and solder the end

  Use the template to bend the brass rod
  

  
  It helps to use a round object as follows:
  

  
  I used a small piece of double sided tape to keep the open ends together before soldering. Applying flux before soldering makes it easier to join both sides.
  

• 3

  Cut and bend the branches

  Cut 16 6" long strips and bend these in half as follows:

View all 10 instructions