Close
0%
0%

NFC Energy Harvest PCB Business Card

I made myself a PCB business card with NFC tag that tranfers my contact info + powers an 8 bit MCU to blink two LEDs!

Similar projects worth following
I made a PCB business card which powers a microcontroller using NFC. It also transmits my contact info over NFC! Runs an ST25DV64K for NFC and energy harvest, zener diode voltage regulator & an STM8L101F3 low power 8 bit MCU to toggle LEDs. Check out my original reddit post with a GIF showing it in action: https://www.reddit.com/r/electronics/comments/efz9xf/my_nfc_powered_blinky_business_card/

Adobe Portable Document Format - 88.81 kB - 01/27/2020 at 03:06

Preview
Download

Enjoy this project?

Share

Discussions

marc kerger wrote 03/02/2024 at 13:52 point

hi, this is quite close to a little project I am trying to make, wondering if you could help me 

  Are you sure? yes | no

margaret wrote 05/10/2023 at 13:44 point

Ok, we're in 2023, but it's still cool. By the way, I have a business idea, but I am afraid of starting it. Fortunately, I found https://paperap.com/free-papers/business/ that made me think that I could do it. It offered me some information on this topic and I really appreciate the free essays on business I read on this source.

  Are you sure? yes | no

nike9307 wrote 03/27/2020 at 14:39 point

This is really cool. A bit of an overkill, but really cool. 

  Are you sure? yes | no

Masitech wrote 02/11/2020 at 21:50 point

Really cool project. How much power are you able to harvest with the current design? and is the project open source? I wanted to created something like this but with a twist it will save with the layout. 

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates