filter_cover.stp

Filter cover STEP file. Not needed for printing

stp - 1.01 MB - 03/22/2020 at 22:25

Download

hard_shell.stp

Hard shell STEP file. Not needed for printing

stp - 1.38 MB - 03/22/2020 at 22:25

Download

tpu_liner.stp

TPU liner STEP file. Not need for printing

stp - 442.75 kB - 03/22/2020 at 22:25

Download

hard_shell.stl

Main shell of the mask. To be printed in a hard plastic like PLA. Uses 70*70mm filter sheets.

Standard Tesselated Geometry - 1.38 MB - 03/22/2020 at 21:58

Download

filter_cover.stl

Cover to secure filter over shell using the elastics of the rubber liner.

Standard Tesselated Geometry - 1.28 MB - 03/22/2020 at 21:58

Download

tpu_liner.stl

Rubber liner to provide sealing against the face. To be printed using TPU materials like NinjaFlex. Once printed, super glue to the shell with the top facing the shell. Ensure that the super glue has dried progressing with assembly. *note: only tested using 82A Recreus FilaFlex

Standard Tesselated Geometry - 851.25 kB - 03/22/2020 at 21:58

Download

tpu_liner_halfed1.stl

Halfed tpu_liner for smaller printers

Standard Tesselated Geometry - 424.20 kB - 03/22/2020 at 21:58

Download

tpu_liner_halfed2.stl

Other half of the tpu_liner

Standard Tesselated Geometry - 421.86 kB - 03/22/2020 at 21:58

Download