Quantity   Component name
1 × Arduino or Arduino-like board We used an Arduino Uno.
3 × 5g Servo Motors One for each eye, and one for the mouth!
1 × 3.5mm Auxillary Cable To carry the analog signal of your friend's voices.
1 × Wind Up Chattering Teeth We bought these at Daiso about two years ago, knowing that someday we'd use them to build a robot.
1 × Antique 1960's Doll Eyes These are supposedly from the 1962 World's Fair where the Space Needle was unveiled. Purchased at Archie McPhee's in Wallingford, Seattle.
1 × Female 3.5mm adapter Attached to one of the Arduino's analog input pins.
1 × IKEA FORSÅ Work Lamp, Black After cutting ours up, the room got a lot darker.
1 × 3D Printer We used a Monoprice Select Mini.
1 × Glow in the Dark PLA We like Hatchbox brand.
1 × 5V Power Source We spliced a USB cable and used a USB wall charger to power our 3 servo motors.
1 × Ethernet Cable 8 little wires, all neatly wrapped up in a slick plastic casing. It's a cable management fantasy!
2 × Red LEDs For that "Terminator" look.
2 × Resistors So you don't pop your LEDs!