Hardware changes - Part 1

A project log for Bluetooth Beacon proximity gateway

Detect beacons and control things without touching anything!

Pedro Minatel • 07/12/2020 at 18:34•0 Comments

Removing ESP32 module to connect to Cypress board:

The AC load 1 and 2 will be used to control the AC lamps and the LED D and S to monitor the AC loads on/off state.

Previous log

First test on the PSoC6 kit for Beacon Scanning (observe mode)

07/12/2020 at 11:20 • 0 comments

Next log

Boards connected!

07/20/2020 at 17:01 • 0 comments

Discussions