Loosely based on the Dust Collector Controller https://hackaday.io/project/167479-just-another-dust-collector-controller and will replace the existing relay controller https://hackaday.io/project/167633-just-another-whole-home-control-system/log/168845-automated-curtain-rod-module
This project will control up to 3 zones of METTechs' CL200T and CL338H motors. The controller can provide up to 3 special function inputs to detect when a zone is open, closed or requesting to be open. All control lines are sent over a standard CAT5/6 cables terminated in a RJ45 at the controller side. On the motor side; the cable can be terminated into a RJ11 or into a breakout board. Each zone has jumpers to control what special functions will be sent to each zone.