Quantity   Component name
1 × PSoC 6 WiFi-BT Pioneer Kit CY8CKIT-062-WiFi-BT, this is the main controller
1 × Singing Bowl 3-4" You can get these at amazon or ebay, they are everywhere. The crystal bowls are pretty expensive, will work my up to one of those. For now, just a small one.
1 × Rotation Platform Included as STL file
1 × (Tool) Creality Ender 3 V2 Great entry level 3D printer, used for all the core prints
1 × (Tool) Anycubic Photon SLA Printer, used for the gears for the high resolution (0.047 mm accuracy)
1 × (Tool) 65W Tilswall Solder Station Really nice solder station, used for all wire connections
1 × (Tool) Hot glue gun Generic hot glue gun to mount components.
1 × (Software) Tera Term Used for serial terminal connection to the CY8CKIT-062-WIFI-BT
1 × (Software) ModusToolbox 2.1 IDE used for project configuration and development.
1 × (Software) Git Used to download the latest software from the Cypress examples
1 × (Software) Library Manager 1.1 Used to configure project to use the proper libraries for the CY8CKIT-062-WIFI-BT
1 × (Software) Arduino IDE Used to develop the Wemos D1 Lite Software
1 × Servo to Mallet swing arm Included as STL file
1 × Singing bowl cushion Most of the bowls on Amazon will come with a cushion. The cushion is just a little pillow the bowl can sit on so you can play it on the ground.
1 × 28BYJ-48 Stepper motor The stepper motor will be used to control the rotation speed of the bowl. This stepper was chosen because it is very quite.
1 × ULN 2003 Driver Board Used to control the 28BYJ-48 stepper motor
1 × Wemos D1 mini Lite This is the wireless controller used in the platform. The main controller will connect to this device to control the bowl.
1 × Singing Bowl platform STL file provided, used the Ender 3 V2 and PLA black filament.
1 × Singing bowl mallet Wooded mallet to play the bowl. The handle will need to be cut off.
1 × Connection wire General 24awg to connect the components