Based on the nRF52832 microcontroller, featuring a Power Amplifier and LNA giving the development board a transmission power of 18.9dBm, and receiver sensitivity of -96dBm. This board has 30X the transmission power of a regular nRF52832, resulting in a longer range, and higher bandwidth over longer distances.

The board is fully compatible with Arduino and comes pre-loaded with the Adafruit nRF52 bootloader. Programming the board can be done trough the USB type C connector directly from Arduino IDE, or trough the SWD pins using J-Link or similar programmer.The board also supports programming Over The Air, without any coding required - just press three buttons on the board.


See a test and further explanation of the board in the Youtube video!