#define joyX A0
#define joyY A1

int button=2;
int buttonState = 0;
int buttonState1 = 0;

void setup() {
pinMode(7,OUTPUT);
pinMode(button,INPUT);
digitalWrite(button, HIGH);
Serial.begin(9600);
}

void loop() {
int xValue = analogRead(joyX);
int yValue = analogRead(joyY);

Serial.print(xValue);
Serial.print("\t");
Serial.println(yValue);

buttonState = digitalRead(button);
Serial.println(buttonState);
if (xValue>=0 && yValue<=10) {="" digitalwrite(10,="" high);="" }="" else{digitalwrite(10,="" low);}="" if="" (xvalue<="10" &&="" yvalue="">=500)
{
digitalWrite(11, HIGH);
}
else{digitalWrite(11, LOW);}

if (xValue>=1020 && yValue>=500)
{
digitalWrite(9, HIGH);
}
else{digitalWrite(9, LOW);}

if (xValue>=500 && yValue>=1020)
{
digitalWrite(8, HIGH);
}
else{digitalWrite(8, LOW);}

if (xValue>=1020 && yValue>=1020)
{
digitalWrite(9, LOW);
digitalWrite(8, LOW);
}

if (buttonState == LOW)
{
Serial.println("Switch = High");
digitalWrite(7, HIGH);
}
else{digitalWrite(7, LOW);}
buttonState1 = digitalRead(7);
Serial.println(buttonState1);
delay(50);
}</=10)>