Close
0%
0%

A Simple 3D Printed Rubber Band Car, FreeCAD Style

My First Foray into FreeCAD.

Public Chat
Similar projects worth following
58 views
0 followers
My first foray into FreeCAD in response to the latest Autodesk Fusion 360 "Personal" version restrictions, the following videos show my first experiences with FreeCAD

Part 1 is here: https://youtu.be/xXa-eYr4Zhg
Part 2 is here: https://youtu.be/THsnVfGp05A
Part 3 is here: https://youtu.be/7T9PXCJ9AYM
Part 4 is here: https://youtu.be/mQG18fyw6Y8

Enjoy this project?

Share

Discussions

Dan Maloney wrote 09/28/2020 at 20:28 point

Hey Greg, thanks for doing this - I need to move away from Fusion360, and FreeCAD is my likely direction. This should help me make the move.

  Are you sure? yes | no

Greg Zumwalt wrote 09/28/2020 at 22:18 point

Hi Dan!

You are very welcome!  This is my first attempt so hopefully I'll improve as I progress.  I'm starting by converting a few of my simpler Fusion models to FreeCAD, then I will resume designing new models using FreeCAD!

Greg

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates