Remoticon: MachineChat - A Universal Sensor Hub

Back to overview

Developing an Universal Sensor Hub, with MachineChat's JEDI One and a Raspberry Pi (sponsored by Digi-Key).

Lutetium

1

Raspberry Pi OS (32bit) with deskop: (mirror tested version)

If you don't have Raspberry Pi OS pre-installed, please use this version:

https://rcn-ee.net/workshops/remoticon_2020/

It's a local mirror of https://www.raspberrypi.org/downloads/

Mirror of BalenaEtcher is provided for easy install thru Windows, Linux, and mac

If you have a different version of Raspberry Pi OS installed, just make sure you have the desktop version.
2

Solder or use Breadboard. ;)

PCB Holder
3

Expose Sensor Wire
4

Loop Wire thru Holes for support

PCB Holder
5

Place Resistor between 13 and 3v3
6

Push White and Red wires into same 3v3 & 13 holes
7

Flip and Solder
8

Flip and Push Black in GND
9

Flip and Solder GND
10

TRIM

Discussions