Contactless Thermometer

Back to overview

Contactless Thermometer build by SoC, 3Dprinted casing, OLED, and sensor. Work with App through MQTT IoT

Michael Zhang

1

Hardware Connection
2
Software Preparation
1. Check and make sure you have installed the ameba 1 board to Arduino IDE via adding this link into “additional boards manager URLs” under “Preference”, and install it in “board manager” under “Tools”, https://github.com/ambiot/amb1_arduino/raw/master/Arduino_package/package_realtek.com_ameba1_index.json
2. Download the ThermoGun source code you find in this repository to your Ameba1 RTL8710 boards using arduino IDE.
3. In order to connect to WiFi and MQTT server, you need to key in your WiFi SSID, WiFi password, MQTT username and MQTT password,
  MQTT username: same as your amebaiot.com username
  MQTT password: same as your amebaiot.com password

Discussions