1 |
× |
DN80 water sensor 3"
|
1 |
× |
Arduino Uno R3 (clones also work)
|
1 |
× |
HiLetgo 2.4 Inch TFT LCD Display Shield Touch Panel
ILI9341 240X320 for Arduino UNO MEGA
|
1 |
× |
length of 3 strand wire
(we used silicon copper wire as its really soft and flexible)
|
1 |
× |
9V battery
|
1 |
× |
set of 3D printed parts
From: https://www.thingiverse.com/thing:4700913
|
1 |
× |
Some shrink wrap tubes in multiple sizes
|
1 |
× |
9V batter mount
|
1 |
× |
Sold
|
1 |
× |
Ranging pole
|
1 |
× |
Switch
Development Kits, Boards and Systems / Development Kits and Boards
|
1 |
× |
3 pin aviation connector
|
2 |
× |
M3 20mm bolts
I used stainless steel ones with an allen-key top
|
2 |
× |
M3 nuts
I used stainless steel ones
|
1 |
× |
M8 bolt
I used a stainless steel one with an allen-key top
|
1 |
× |
M8 Wing nut
I used stainless steel one
|
1 |
× |
Silicone
I used this to waterproof the sensor inside the DN80 and the wire connections
|
6 |
× |
Wood screws
I used stainless steel counter sunk wood screws to hold the arduino housing togeather
|
1 |
× |
Wires to link the housing section
I used old off cuts of wire from the DN80.
|