IT in a Box

Description

An extremely simple and easy to use wireless KVM for setting up and controlling computers when you can't physically be there. A single USB cable provides keyboard and mouse emulation while simultaneously powering the Raspberry Pi Zero. An 18650 Uninterruptible Power Supply allows the RPi to stay powered during computer reboots and to trigger system keys during boot to access the Bios, re-image computer, etc.

Files

IT in a Box Lid.stl

Standard Tesselated Geometry - 700.08 kB - 01/24/2021 at 06:46

Download

IT In a Box.stl

Standard Tesselated Geometry - 175.67 kB - 01/24/2021 at 06:46

Download

Components

1 × Raspberry Pi Zero W Only the bare module is required for the project, but you may need adapters to get set up depending on what you already have amazon.com/Raspberry-Pi-Zero-Wireless-model/dp/B06XFZC3BX

1 × HDMI to CSI-2 adapter Allows you to connect an HDMI input to the RPi's camera connector amazon.com/gp/product/B0899L6ZXZ

1 × 18650 Uninterruptible Power Supply Provides a constant supply of power to the RPi to allow for controlling the computer during reboots amazon.com/gp/product/B07DB78PGJ

1 × Unprotected 18650 Battery

1 × Right Angle Micro USB Cables One cable connects RPi to UPS and one connects to the external USB cable to control the computer amazon.com/gp/product/B01N337FQF

Build Instructions

Collapse

1

3D Print Case
2

Install Pi KVM

Install the Pi KVM program on the RPi and configure
3

Solder reset button to RPi

Solder wires from the reset pins on the RPi to the button

View all 5 instructions

Discussions

IT in a Box

Become a Hackaday.io member

Just one more thing

Description

Files

IT in a Box Lid.stl

IT In a Box.stl

Components

Build Instructions Collapse

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member

Build Instructions

Collapse