10MHz isolated optocoupler board is ok

A project log for ElecLab: Raspberry PI With FX3U PLC

Based on Raspberry Pi 7 inch touch screen and RS485 can be used for many control filed, We tested FX3U PLC with Modbus

ElecLabElecLab 02/23/2021 at 08:380 Comments

Use the FPGA T8 generate the pulse of 1Hz, 5Hz, 10Hz, 100Hz, 1kHz, 10kHz, 100kHz, 1MHz, 5MHz, 10MHz, The isolation optocoupler board can work normally