Ready-to-use Arduino Sketch for I/O Testing

I made this sketch to test analog/digital IO pin for everyone, don't bother to write lengthy C program!

Athaariq "Eric" Ardhiansyah

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Public Chat

Similar projects worth following

View Gallery

Public Chat

Description

Have you ever want to switch a pin on/off from serial monitor? and did you ever need to push message to (let's say...) Bluetooth Module just by writing via serial monitor?

Then you are came to the right place!

I made a sketch that has ability to switch every single I/O pin just by writing a little command to Serial Monitor, no manual program required.

It's also allow you to forward message to second serial port (in Arduino, it's Serial1) for supported board.

Beside of that, this sketch also useful if you want to keep heavy-lifting logic on PC program then send command to Arduino via COM port to do things with hardware.

Anyway, it's available on GitHub and it is called "Arduino CLI", check it out :)

Files

arduino_cli.zip

(Updated on March 22nd 2021)

Zip Archive - 10.62 kB - 03/21/2021 at 19:57

Download

Components

1 × Arduino Board Arduino Uno or stronger is recommended
1 × a Laptop With USB type A, good luck finding dongle for mac users lol
1 × USB Cable The type is depend on which Arduino you'll use, if uno then use Type A - Type B cable
3 × Male-to-male Jumper Cable
1 × Resistor 220 ohm

View all 7 components

Build Instructions

Collapse

1

Prepare required things

See "components" section for the list
2

Arrange the components

Source: create.arduino.cc
3

Prepare your laptop

View all 8 instructions

Discussions

Similar Projects

Notes of replacing radio board of an old pager with Arduino+LoRa boards.

Ready-to-use Arduino Sketch for I/O Testing

Description

Files

arduino_cli.zip

Components

Build Instructions

Collapse

Discussions

Similar Projects

MotoLoRa Advisor

Run "NOT for Mega" Tinysine GPS shield on a Mega

ATtiny10 Programming With Arduino IDE

Home Automation Using Cortana

Ready-to-use Arduino Sketch for I/O Testing

Become a Hackaday.io member

Just one more thing

Description

Files

arduino_cli.zip

Components

Build Instructions Collapse

Enjoy this project?

Discussions

Become a Hackaday.io Member

Similar Projects

MotoLoRa Advisor

Run "NOT for Mega" Tinysine GPS shield on a Mega

ATtiny10 Programming With Arduino IDE

Home Automation Using Cortana

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member

Build Instructions

Collapse