Close
0%
0%

LARGE DIY 50W CO2 LASER

I wanted my own CO2 Laser large enough to cut 1/2 a sheet of 4x8' plywood or plexiglass. So... I built one very close.

Public Chat
Similar projects worth following
Its a 50W CO2 Laser - Nema 17 Steppers with controllers- 2020-V Extruded Alum - 3d Printed Parts - Power Supplies, and the 2nd Costly part... RDC6445G Controller.. (But could've used an arduino) I've started initial testing, but haven't gotten any further. I'd LOVE to repalce the Analog milliamp meter with a DIY VFD Tube solution.. I think it would look soooo cool... If anyone can help design that VFD Circuit for me. That would be AWESOME.

Enjoy this project?

Share

Discussions

Dan Maloney wrote 03/22/2021 at 18:21 point

I haven't seen too many scratch-built laser cutter projects, would be interesting to see the design and build process.

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates