Instructions | LED Ping Pong Board

1

Step 1

For every other hole on the pegboard, use a drill bit to slightly widen the hole. Do this until you have 529 widened holes.
2

Step 2

Snugly fit each LED inside every hole.
3

Step 3

In order to deliver enough power to every LED strip, you have to connect every 3 or 4 strips together using wires and solder.
4

Step 4

Use an Xacto knife to cut a plus shape into each ball. Do NOT burn holes into the Ping Pong balls as it releases toxic fumes.
5

Step 5

Hotglue every Ping Pong ball on top of each LED
6

Step 6

Connect the power supply, the WEMOS D1 Mini, and Nintendo Nunchuk.

LED Ping Pong Board