JPEG Image - 1.43 MB - 06/17/2023 at 18:10 |
|
|
JPEG Image - 1.31 MB - 06/17/2023 at 18:10 |
|
|
JPEG Image - 1.17 MB - 06/17/2023 at 18:10 |
|
|
JPEG Image - 1.13 MB - 06/17/2023 at 18:10 |
|
|
JPEG Image - 1.46 MB - 06/17/2023 at 18:10 |
|
|
JPEG Image - 1.11 MB - 06/17/2023 at 18:10 |
|
|
JPEG Image - 966.17 kB - 06/17/2023 at 18:10 |
|
|
JPEG Image - 921.54 kB - 06/17/2023 at 18:10 |
|
|
JPEG Image - 1.07 MB - 06/17/2023 at 18:10 |
|
|
JPEG Image - 926.44 kB - 06/17/2023 at 18:10 |
|
|
Camera connect.stlConection part for CameraStandard Tesselated Geometry - 10.82 kB - 04/01/2021 at 20:30 |
|
|
Front.stlFront Panel with buttonsStandard Tesselated Geometry - 114.24 kB - 04/01/2021 at 20:30 |
|
|
Side L.stlLeft side of the deviceStandard Tesselated Geometry - 46.37 kB - 04/01/2021 at 20:30 |
|
|
Frame.stlFull frame for larger than 25cmx20cm 3d printer bedsStandard Tesselated Geometry - 99.30 kB - 04/01/2021 at 20:30 |
|
|
Frame B.stlBack part of the frame for smaller printersStandard Tesselated Geometry - 50.86 kB - 04/01/2021 at 20:30 |
|
|
Frame F.stlFront part of the frame for smaller printersStandard Tesselated Geometry - 55.36 kB - 04/01/2021 at 20:30 |
|
|
Side R.stlRight side of the printerStandard Tesselated Geometry - 46.37 kB - 04/01/2021 at 20:30 |
|
|
Standard Tesselated Geometry - 28.11 kB - 04/01/2021 at 20:30 |
|
|
Standard Tesselated Geometry - 53.99 kB - 04/01/2021 at 20:30 |
|
|
Angle_L.stlConnection partStandard Tesselated Geometry - 3.60 kB - 04/01/2021 at 20:30 |
|
|
Camera _hold_top.stlconection partStandard Tesselated Geometry - 55.84 kB - 04/01/2021 at 20:30 |
|
|
Angle_R.stlConnection partStandard Tesselated Geometry - 3.60 kB - 04/01/2021 at 20:30 |
|