Modernising a Matiz
Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
My goal so far is to create a tesla'ish center touchscreen that replaces the radio. What I want the control center to do:
Fusion 360 designs
touchscreen holder v2.stltouchscreen holder prototypeStandard Tesselated Geometry - 418.25 kB - 04/28/2021 at 09:24 |
|
after a few months of research I finally got a top level diagram
Top Level:
CCU:
UIU:
Bought a 2x80W + 100W amplifier. Has built in bluetooth, but I don't think I'm going to use that.
https://www.aliexpress.com/item/4001290145670.html?spm=a2g0s.9042311.0.0.691a4c4dS2ZRBU
Neo Hop
AndreasVS
stefan.schnitzer
Max2Play
andriy.malyshenko
Nice! I've added this to my follow list. I'm currently updating a 2009 Chevrolet Express Cargo Van. It did not have a rear-view camera originally. One is going in today. I also plan to replace the radio with a unit that has an aux/line-in, so I can plug in one of the bluetooth receivers I have lying around. I already have an OBD trip computer, the ScanGauge, that I've plugged into whatever car I'm owning at the moment.
In my case, everything I'm doing is with off-the-shelf parts, and won't look 'factory' or be executed to the level of fit and finish you're achieving. But certain tech in today's cars really do improve the vehicle significantly -- rear view cameras being a big one. For instance, mandating all cars sold in the US as model-year 2018 and newer must come equipped with a rear-view camera. I think that's good policy; about 18k injuries related to a vehicle backing up occur each year in the US alone.