26 |
× |
Microswitch from China
A regular microswitch actuator. Comes a dime a dozen from the finest Chinese knockoff sellers.
|
26 |
× |
LEDBERG LED strip (3 strips each)
Actually, I need only 50-or-so strips, but I want to connect every drawer using the original connector, so I keep the rest aside for other projects. The wallwarts are useful too.
|
3 |
× |
ANSLUTA power supply 20W
Got a few in the bargain bin at my local IKEA. One is enough to feed them all, but for the sake of shorter 24V wires, I got one for each side of the kitchen.
|
26 |
× |
Dupont 2p connector with wire
The ANSLUTA-supplies have a proprietary secundary connector, but in the end it comes down to two pins, 2.54mm apart. The Dupont connector works great, just have to keep the polarity in check.
|
52 |
× |
Self-tapping 2.2*25mm screw
To fasten the microswitches.
|
130 |
× |
IKEA screw 100344
For fastening the plates for the LED strips and the fitting plate for the microswitches.
|
3 |
× |
Infrared door switch
For a couple of doors and a specific drawer.
|