Quantity   Component name
1 × AT90USB646-MU Microcontroller for the keyboard
1 × USB2513BI-AEZG USB-HUB Chip for 3 downstream ports. 1 for the keyboard and 2 USB-Ports
1 × MIC2026A-1YM-TR Power Management IC following the USB protocol for the 2 USB-Ports
4 × PRT5V0U2X My favorite way to do ESD protection on USB ports
1 × Amphenol E15TS-06 The Surface mount encoder that i used
84 × Gateron Red RGB Switches
84 × Kailh cherry mx switch sockets To make the keyswitches easy to swap out
1 × JAE DX07S016JA1R1500 My preferred USB-C port because it is easy to solder on by hand
2 × TE 292303-3 My used USB-A Ports
85 × YS-SK6812MINI-E The used RGB Leds compatible with the QMK firmware
1 × SMD resistors/condensators/ferrits/crystals Complete BOM list on github