Close

The crowded Shibuya Scramble

A project log for Rämixx500 - Amiga 500+ Mainboard

Open Hardware Remake of this Commodore Masterpiece

Edoardo AUTERIEdoardo AUTERI 06/26/2021 at 01:160 Comments

Now the board begins to take on its appearance.

Axial resistors and networks, discrete semiconductors (diodes, BJTs) are now sitting close to each other. Please note that RP106 and RP107 are recommended if the kickstart version is 3.1.4 or newer.

I am going to install either 3.1.4 and 3.2 kickstarts.

Pay attention to the isolated (RP103, RP402, RP403, RP201-RP203) and bussed networks (RP104, RP101, RP102, RP401, RP106, RP107, RP501). Pin 1 is marked by a dot.

Next step: EMI filters (capacitors, beads)

Discussions