Now the board begins to take on its appearance.

Axial resistors and networks, discrete semiconductors (diodes, BJTs) are now sitting close to each other. Please note that RP106 and RP107 are recommended if the kickstart version is 3.1.4 or newer.

I am going to install either 3.1.4 and 3.2 kickstarts.

Pay attention to the isolated (RP103, RP402, RP403, RP201-RP203) and bussed networks (RP104, RP101, RP102, RP401, RP106, RP107, RP501). Pin 1 is marked by a dot.

Next step: EMI filters (capacitors, beads)