1 |
× |
Arduino Nano (5V)
The older Arduino Nano - compact and inexpensive. Note - 5V version
|
1 |
× |
SP LEDs - in various configurations
Serially Programmable RGB LEDs. They'll illuminate when you tell them to, and in any colour
|
1 |
× |
Printed Circuit Board
I made a PCB version of an initial protoboard i'd built for a single purpose
|
4 |
× |
Terminal Blocks
The screw-clamp version of the handy blocks to attach wires to a PCB
|
1 |
× |
OLED Display
A 128 x 64 pixel mini display w/ I2C interface - widely available
|
1 |
× |
Push Button
A single-button interface uses a pushbutton to control the UI
|
2 |
× |
Pin Headers
Two rows of female headers to mate with the Arduino Nano
|
1 |
× |
Power Switch (Beefy)
A switch capable of an Amp or two is key for power routing
|
3 |
× |
3D printed parts
A 3D printed case, lid and a centring frame for the OLED display and clean up the final project nicely. Screw mounts are a nice feature.
|