TopLid.stlLid connects to Encoder Disc. Label fits over lid.netfabb - 211.21 kB - 07/16/2021 at 19:14 |
|
|
Encoder_Discv2_correct_code.stlThis is the 3-bit gray encoder disc. Line the 3 bits off position with task 0 on the lid.netfabb - 398.13 kB - 07/16/2021 at 19:14 |
|
|
Label.stlThe label model sits on top of the top lid, meant to be changed for individual needs. Pause print for filament change on icons.netfabb - 452.23 kB - 07/16/2021 at 19:14 |
|
|
Base_Shaft.stlFirst design was to keep photo sensors shielded but that didn't work, opted for just photo sensors placed at hole location.netfabb - 248.81 kB - 07/16/2021 at 19:14 |
|
|
Base_LED_PhotoSensor.stlWith locations for pin drops for the photo resistors and LED.netfabb - 176.35 kB - 07/16/2021 at 19:14 |
|
|
TaskTrack.inoArduino Code for 3 sensors and gray code to number conversion. outputs to serialino - 2.03 kB - 07/16/2021 at 19:13 |
|