ino - 3.80 kB - 08/05/2021 at 10:46 |
|
|
PernoChiusura.STLThis part is needed to close the wristband.Standard Tesselated Geometry - 211.02 kB - 08/05/2021 at 10:45 |
|
|
Cinturino_3a.STLNew wristbandStandard Tesselated Geometry - 721.08 kB - 08/05/2021 at 10:45 |
|
|
body1z.STLNew body (updated)Standard Tesselated Geometry - 591.29 kB - 08/05/2021 at 10:45 |
|
|
TOF system test 1.SLDASMSolidworks assembly of the 3d printed parts.sldasm - 1.08 MB - 08/05/2021 at 10:43 |
|
|
Cinturino_3a.SLDPRTNew wristbandsldprt - 1.42 MB - 08/05/2021 at 10:43 |
|
|
body1z.SLDPRTNew body (updated)sldprt - 847.91 kB - 08/05/2021 at 10:43 |
|
|
sldprt - 220.18 kB - 08/05/2021 at 10:43 |
|
|
body1.SLDPRTBody (old version)sldprt - 398.10 kB - 08/05/2021 at 10:43 |
|
|
Cinturino_2B.SLDPRTOld wristbandsldprt - 379.93 kB - 08/05/2021 at 10:43 |
|
|
PernoChiusura.SLDPRTThis part is needed to close the wristband.sldprt - 108.76 kB - 08/05/2021 at 10:43 |
|