11/01/2021 at 14:43 •
A few days after placing my order with PCBWay, my PCBs arrived. It's been about a week since they arrived now and I've had some time to take a look at them. They appear to be great and should work so long as I haven't screwed up the design. I'll be purchasing the other parts soon, so it shouldn't be too long until I've got the hardware finished. Quick thanks to PCBWay for providing me with the PCBs, the ordering process was simple, easy and fast.
10/05/2021 at 02:13 •
I've recieved a lot of schoolwork recently and had to delay the project a little bit. It's nearly been finished, but there's still a little to do. I hope to have it completed by the end of this month or half-way through the next.
08/17/2021 at 17:24 •
C++ is similar to C, a language that I've had a bit of experience with. I find C to be quite fun to use and easy to understand, it's the language that I used for my entry to the 4MB Jam on itch. I also used it for all of my Arduino projects as well as another personal game dev project.
Python is the first programming language that I learned, in a class for the Raspberry Pi, and one of my most used. I'm not a huge fan of it, but it often gets the job done.
I've settled on using Espruino for now, but I can always change over to Arduino later on. In other news, I've got the hardware wiring finalized and I'll start making the schematics, with KiCad, for the watch soon. I'll use AllPCB's free PCB offering for at least my first batch and the parts will likely be coming from DigiKey.
08/07/2021 at 04:51 •
After some consideration I settled on purchasing these parts for the initial prototyping. The breadboard friendly parts give me the opportunity to reuse them in future projects while also making it easy to reconfigure the layout on the breadboard.
The screen in particular is far from what will be used in the "production" model. It's much larger and has an aspect ratio which is... less than desirable... for a smartwatch. During prototyping I intend to use only 240x240px centered on the screen. As for the touch capabilities... it is as of yet undecided whether the production model will use a touchscreen or not. In the scenario that it does, I'll be prepared to whip up a touch interface on my prototyping screen prior to purchasing any final parts.