Close

11) Getting started and functioning

A project log for VinyGo, a stereo vinyl recorder

For artists, vinyl stores, recording studios, or music lovers

mras2anmras2an 08/29/2021 at 20:140 Comments

You have to clone VinyGo git repository: git clone https://github.com/Mras2an/VinyGo.git

11.1) Hardware connection

11.2) Compile and program the code

See log 9) Flash and build ESP32

11.3) First boot

1 - Power on the VinyGo board, You see the LCD test menu.

2 - Click on it, and check all the tests (sensors, and commands). If it OK return to the menu

3 - Go to the calibration menu and make your calibration for 7, 10, and 12p vinyl.

4 - The system is ready, enjoy :-)

Discussions