Close
0%
0%

Spooky Coffin

This is a spooky and fun learn-to-solder kit!

Similar projects worth following
92 views
0 followers
This board is great for anyone who's a fan of Halloween, Pirates, or just likes spooky, glowing coffins!

This is the third board Robyn has designed. She wanted to add some different elements from the HRC and ASC boards. Backlighting is cool and she wanted to see if she could achieve a glowing effect but still use beginner friendly through hole components. The artwork for the skull is by Gabriel VanHelsing under a Creative Commons CC-BY-SA-3.0 license and can be found here.

VID_20211019_144840.mp4

Video of coffin turned on

MPEG-4 Video - 17.75 MB - 10/19/2021 at 21:51

Download

  • 1
    Step 1: Resistors

    I trying to go in order of height when soldering components. I start with resistors because they are closest to the board.

  • 2
    Step 2: LEDs

    If you're confused about which side is positive or negative, we added a reference in silk screen at the bottom of the board!

  • 3
    Step 3: Switch

    The switch is easy to bridge so be sure to not use too much solder!

View all 5 instructions

Enjoy this project?

Share

Discussions

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates