- Gather components

- Glue some black tape on edges of screen to reduce parasite lighting

- Use pictures from my Github to properly solder wires

- Desolder connectors from Creative Play! sound card. Solder USB D+ and D- to Rpi USB (check Micro-usb pinout). VCC and GND can be soldered to GPIo Header.

- Solder wires from Creative Play! to iPod's minijack

- Make a loop from GND on charge module through iPod's switch to Rpi's GND. VCC from charge module should connect to Rpi +5v

- Burn SD card with Raspberry Pi Imager (Raspberry Pi OS Lite)

- Follow instructions on Github to install script