CAD's in the Repo

A project log for ComputeDeck-B3

Raspberry Pi Zero W 2 Arm mounted Cyberdeck with a Chorded Keyboard

atltvheadatltvhead 08/31/2022 at 02:045 Comments

I've added the 3mf printer files into the repo, as well as the fusion360 archive file for those that want to tweak. 

Link below! 

Cyberdeck_Z2/CAD at main · ATLTVHEAD/Cyberdeck_Z2 · GitHub


kelvinA wrote 09/08/2022 at 16:12 point

Nice. I was curious about that arm scan becaue I don't have a 3D scanner and the cross section was hard to visualise.

  Are you sure? yes | no

atltvhead wrote 09/08/2022 at 17:36 point

Howdy! I Agree the visualisation of the arm is difficult to view. I made an arm part using section views of the mesh, but it was very tricky (for me) to sketch the outline of the mesh without moving the camera all around. 

I'll put this as a too do for instructions section, and will make a "how to make your arm without a scan section."

With that said, so long as your arm is smaller than the hard bracelets, the foam cushion should conform to your arm. 

  Are you sure? yes | no

kelvinA wrote 09/08/2022 at 17:42 point

I just finished modelling my arm right when this comment came in. I'm writing up a project log about it now.

  Are you sure? yes | no

kelvinA wrote 09/08/2022 at 18:16 point

Project log written:

  Are you sure? yes | no

atltvhead wrote 09/09/2022 at 14:05 point

Oh! Forgot about modelling it from photographs!!! 

Nice write-up and project!!!  @kelvinA

  Are you sure? yes | no