1 |
× |
Three-phase AC Permanent Magnet Wind Generator
The desired BLDC would be 62mm OD or larger, with 12 poles and 14 magnets in the rotor, preferably neodymium magnets, using a stator at least 52mm in diameter and 8-10mm thick. The ohmic resistance of each phase that is as low as possible and that does not exceed 15 ohms. The kv value between 25-45 would be ideal in this range. There are limited BLDC motor options with these features. The most common are Gimbals and Hub motors. Some like these might work https://aerialpixels.com/shop/motors/brushless-gimbal-motors/iflight-rc-ipower-brushless-gimbal-motors/ipower-gbm5208-180t-brushless-gimbal-motor-dslr/ https://shop.iflight-rc.com/ipower-motor-gm5208-12-brushless-gimbal-motor-pro279
|
1 |
× |
Three Phase Rectifier (option 1)
https://amzn.to/3yqbDYa
|
6 |
× |
Schottky Diodes (Option 2)
https://amzn.to/3egj8df
|
1 |
× |
6203-2RS Bearing
https://amzn.to/3EunsjN
|
2 |
× |
Retaining Clips 15mm and 40mm
https://amzn.to/3RJ6SQm
|
28 |
× |
Screws Bolts Nuts Washers Assortment Kit
https://amzn.to/3SMmXFY
|
1 |
× |
Battery Pack with USB Output NP-F970
https://amzn.to/3CHaeio
|
1 |
× |
26 AWG Magnet Wire
https://amzn.to/3kzsNOU
|
1 |
× |
Lightweight Camera Mount Tripod (Opcional)
https://amzn.to/3CIdzxH
|
1 |
× |
2 Part Epoxy Glue
https://amzn.to/3yrdEDq
|
1 |
× |
Paracord (Opcional)
https://amzn.to/3Vf2zis
|