Files | BRUNO'S HAND | Hackaday.io

1 st step: prototype

JPEG Image - 89.71 kB - 05/19/2022 at 12:43

Prototype

MPEG-4 Video - 941.13 kB - 05/19/2022 at 12:44

2nd step: we put tape on fingers so the molding plastic won't burn

JPEG Image - 131.32 kB - 05/19/2022 at 12:45

Making rings with molding plastic. Plastic granules are put in hot water (at least 60C). It melts and becomes easy to mold.

JPEG Image - 199.82 kB - 05/19/2022 at 12:46

JPEG Image - 134.46 kB - 05/19/2022 at 12:48

process of making the rings

MPEG-4 Video - 787.61 kB - 05/19/2022 at 12:53

2nd step finished: all rings are made. when the plastic gets cold, it hardens

JPEG Image - 103.83 kB - 05/19/2022 at 12:51

3rd step: make holes to put strings through the rings

JPEG Image - 216.28 kB - 05/19/2022 at 12:54

We put the strings in a the glove.

JPEG Image - 172.04 kB - 05/25/2022 at 12:36

MPEG-4 Video - 1.33 MB - 05/25/2022 at 12:37