Sensor housing for SBM-20 Geiger Müller Tube

A project log for SolarSens - 3D printable solar weatherstation

A 3D printable modular wifi weatherstation.

FabFab 08/12/2022 at 15:050 Comments

In order to expand the range of possible sensors, I created a housing in which an SBM-20 Geiger-Müller tube could be accommodated.

It would also be possible to detect ionizing radiation with SolarSens. Of course, additional electronics are required for this. This would then be installed inside the case.
I hope you get an impression of how the whole thing could look like.

Look of the sensor housing
Sensor housing mounted on the sensor surface of SolarSens