J.C. Nelson
optiboot_flash_atmega1281_UART1_115200_16000000L_B5.hexA bootloader which makes it easier to flash from Arduino or PIO - Hold down STOP when you power on and it will wait forever for programming. You can release STOP after power on (pretty much faster than you can release), there's no need to keep holding.hex - 1.58 kB - 09/29/2022 at 00:38 |
|
Cricut Hacking
Putting Marlin 2.x on the Cricut Expression because, well, why not? Also, some reverse engineering on CRV001