Close
0%
0%

I2C Device Scanner

The example will scan the I2C bus for devices that is connected to Ameba.

Similar projects worth following
0 followers
The example will scan the I2C bus for devices that is connected to Ameba. When a device is found, it will be shown on the serial monitor with the address of the device.

BW16 is a dual-frequency Wi-Fi + Bluetooth SoC module developed based on RTL8720DN. It supports dual-frequency (2.4GHz or 5GHz) WLAN and low power Bluetooth 5.0; and integratesARMV8 (Cortex-M4F) high-performance MCU, ARM V8M (Cortex-M0) low-power MCU, WLAN (802.11 a / b / g / n), MAC, Bluetooth and RF baseband, and provides a set of configurable GPIO ports for the control of different peripherals.

More Resources:

If you need additional technical documents or the source code for this project. Please visit the official websites and join the Facebook group and forum.

Ameba Official Website: https://www.amebaiot.com/en/ 

Ameba Facebook Group: https://www.facebook.com/groups/amebaioten 

Ameba Forum: https://forum.amebaiot.com/

  • 1 × BW16
  • 1 × I2C Device

  • 1
    Setup

    Connect the I2C device to I2C_SDA and I2C_SCL of the board.

    Open the example in “File” → “Example” → “AmebaWire” → “I2C_Scanner”.

    1

View all instructions

Enjoy this project?

Share

Discussions

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates