BatteryCase_18650_Cover (New).stlCover for the 18650 Battery CaseStandard Tesselated Geometry - 24.50 kB - 02/28/2023 at 21:47 |
|
|
Landing_Gear.stlThe "shoes" of the battery cases. Highly recommended to be printed with TPU (or other soft filaments).Standard Tesselated Geometry - 11.02 kB - 01/05/2023 at 22:41 |
|
|
BatteryCase_18650.stlCase for 18650 LiIon cellsStandard Tesselated Geometry - 480.36 kB - 01/05/2023 at 22:41 |
|
|
BatteryCase_DJI.stlCase for original DJI LiPo cellsStandard Tesselated Geometry - 369.81 kB - 01/05/2023 at 22:41 |
|
|
BatteryCase_21700_Bottom.stlBottom cover for the 21700 LiIon casesStandard Tesselated Geometry - 88.95 kB - 01/05/2023 at 22:40 |
|
|
BatteryCase_21700_B2.stlSidewinder 2 for 21700 LiIon case (3 piece)Standard Tesselated Geometry - 292.95 kB - 01/05/2023 at 22:40 |
|
|
BatteryCase_21700_B1.stlSidewinder 1 for 21700 LiIon case (3 piece)Standard Tesselated Geometry - 387.58 kB - 01/05/2023 at 22:39 |
|
|
BatteryCase_21700.stlCase for 21700 LiIon cells (1 piece)Standard Tesselated Geometry - 1.10 MB - 01/05/2023 at 22:38 |
|
|
BatteryCase_21700_A.stlCase for 21700 LiIon cells (3 piece)Standard Tesselated Geometry - 674.20 kB - 01/05/2023 at 22:37 |
|
|
BatteryCase_Cover.stlProtective cover for the batteriesStandard Tesselated Geometry - 66.29 kB - 01/05/2023 at 22:37 |
|
|
BatteryCase_Lock.stlLocks the battery cases in the droneStandard Tesselated Geometry - 15.71 kB - 01/05/2023 at 22:37 |
|