Final hardware setup

A project log for Pi Zero PC by Bay Networks (The Pikelet)

I acquired a great little EN104 Bay Networks 'Netgear Hub'. I decided to re-purpose it to house a little Pi Zer0.

tinkerzonetinkerzone 01/23/2017 at 03:090 Comments

Wiring it all together was pretty easy. Only one setback occured when I realised the positive lead for the power lead was not long enough to reach the 5v port on the pi zero. A quick cut, solder, and heatsink another 3cm of cable fixed the problem in a couple of minutes.