Arduino Nano 33 BLE

A project log for Biotop

A mask that filters pollutants from the air in a biological way.

m-bindhammerM. Bindhammer 04/02/2023 at 14:040 Comments


The nice thing about the Arduino Nano 33 BLE, besides the Bluetooth, is that it has an IMU on board. We can use it as a human-machine interface for the AR glasses. To do this, the Arduino_LSM9DS1 library needs to be installed. An example code for the accelerometer is shown here. The accelerometer can also be used to go into power save mode when no movement is detected for a certain time, for example during charging. In addition, a warning can be issued if one takes critical positions while wearing the mask.

U8x8 lib

The U8x8 library works without problems with the Arduino Nano 33 BLE. An unnamed I2C 128x64 OLED was used for testing.

Adafruit SGP30 lib

Also the Adafruit SGP30 library works without any issues with the Arduino Nano 33 BLE.