Project Logs

Collapse

• 5/15 - 5/19

  will dennis • 05/19/2023 at 17:00 • 0 comments

  Redid 3D model because it was too big

  Began printing our 3D models

  Continued work on the ESP32

  printed out colors for the Feeling wheel

• 5/8/23 - 5/12/23

  raneyda • 05/19/2023 at 05:28 • 0 comments

  Researched how to code and make two ESP32 send data between each other

  Worked on the physical ESP32

• 5/1 - 5/5

  will dennis • 05/08/2023 at 17:37 • 0 comments

  last week we finished coding our stepper motors. 

  we made out arrows.

  we finally finished out final draft on our logo design. 

  the 3d modled of our box is finally complete and now we can move forward with printing

• 4/24/23-4/28/23

  raneyda • 05/02/2023 at 17:36 • 0 comments

  Esp32 arrived and we researched how to connect the ESP32 with the Arduino Uno

  Soldered the end stop and connected it the Arduino Uno

  Attempted to figure vvout why the Stepper motor wasn't spinning when it was supposed to it could either be the power supply or the stepper motor driver

  coded the end stop so that the stepper motor would stop spinning when the end stop was pressed

• 4/17-4/21

  will dennis • 04/25/2023 at 17:45 • 0 comments

  This week we were able to get our stepper motor to spin finally but were still working on the end stopper. we finished designing the remote and researched more about ir sensors and connecting remotes to wifi.

• 4/10/23 - 4/15/23

  raneyda • 04/17/2023 at 17:23 • 0 comments

  4/10/23 - 4/15/23

  -began 3d model of wheel

  -began designing wifi remote for feeling wheel

  what we are basing our wheel on

  -researching the wifi remote

  -researching how to use and build the stepper motor

  -began researching how to code stepper motors

View all 6 project logs