nd-3d-
Lattice Cube with Engineering Plastic
09/09/2023 at 20:14 • 0 comments -
ABS & PC blend
09/02/2023 at 21:04 • 0 commentsWhite ABS nozzle: 0.6 mm, layer height: 0.3 mm
Orange PC blend nozzle 1 mm, layer height: 0.2 mm
![]()
![]()
![]()
![]()
![]()
![]()
-
Lattice Cube Challenge Accepted
09/02/2023 at 20:51 • 1 commentScale 0.5
Advanced Semicrystalline Polymer
![]()
![]()
![]()
OP "PEEK" Printer and Proportional PWM SSR
DIY PEEK printer, the first one with an open chamber, and the ability to assign the temperature to each layer in the slicer
